Видео

Hey mate. Able to put a thicker mattress in it or is 50mm all it can take?

Hey mate what glue do you use to glue down the carpet to the timber

Does your phone have to be plugged in to listen to music and maps ?

Good job Daniel. One up grade perhaps would be to use some 4mm Yellow Poly Cable Feeder from Bunnings as draw runners. The draws will slide a lot easier. I found drilling and countersinking holes for small screws the best attachment method.

These are great ive been using these for a few years now. Save a ton of weight. Neat job as always Daniel! When are you doing the drawers for the other side? Keen to see what you come up with as the Kings ones i have weigh a ton and im keen to reduce weight in my canopy.

Incredible mate, possible to include a link to a more detailed wiring diagram for your setup?

That's one hell of a kitchen! Great job.

Looking good. 👍

Seriously mate don't talk yr work down, I think you are awesome at building stuff, take my hat of to mate, love watching yr vids 👍

nice job Daniel, You may end up keeping these as they look great and practical, cheers

Well done mate, ur setup is really well thought out. Not for me, but I’m single, and not u!🤣. I really like ur slide out bench setup, and other than the 6mm MDF, (I understand that it’s temporary, and I’m not having a dig, I just hate mdf, as I always manage to get it wet somehow🤷🏿‍♂️),that’s a really neat and cheap pantry setup. You’ve come a long way! 🎉 PS Still figure u were a flight attendant in another life ! Cheers and well played! 👍🍻🎯🇦🇺

Mate, as a chippy when you said 6mm MDF, I was like how the hell are you going to screw into the side of that, you seemed to do it I don't know how you did without splitting it, but good on you they turned out nice, I would have gone for 9mm min or 12mm to get decent screws in there, Also when you cut Aluminium on the drop saw, place an offcut of timber on top of the aluminium right up to the blade and clamp them both down, Aluminium has a tendency to catch on regular drop saw blades, when it does it will rip out of that hold down clamp and a fast moving bit of shrapnel will go wherever it want's, normally back at you so make sure to wear eye protection when cutting it.

Looking great Daniel. You are pretty good on the tools as well mate. What did you do with the small roller door to stop it from opening if I may ask

Don't see the point in the pantry slide now this looks better in my opinion

Great vids fella, but thought i would point out that you never set your circular saw blade depth correctly. You only want 5mm max poking out the bottom of the stock you're sawing though. This makes for easier, smoother, cleaner cutting. 🤙

Throw a vac on the back of your saw, if your cutting mdf and wear a mask. It's pretty bad stuff

Nice work. Looking forward to seeing how the set up works in the trip episode(s).

Looks good Daniel, well done.

Mate, these may turn out becoming a pretty permanent temporary solution, just saying.

Hey Dan hope that cards exp. Builds coming along nicely

"Just a temporary solution".... Proceeds to vinyl wrap and carpet the pantry. Hahah

Nice one. 👍

Exactly what I had planned to do with my kmart plastic drawers since investing in alu double drawer with slide out table. Thanks for sharing. Cheers

Noice

I like that mate, im redoing my setup and was going to try the plastic tubs, just hadn't worked it out fully yet.

Thanks for supporting your locals bunnings.

Temporary build Over and beyond. Lol With alloy thing'esss to keep draw shut. Curve all the corners, so you don't cut fingers in the cold Bloody great job. Cobb Cheers

Clean

Does the job, I don't have a lot of $$ so these cheaper designs are up my alley, thanks for sharing 👍🏿

Nice job matey the draws are a great idea.

Lookin' mint. I assume the shelf is 'upside down' so those sections stop things from moving around? Yeah, a metal strip at the bottom for the magnets to 'lock' too would be a way to keep it closed and offer a small lip to stop things sliding out freely.

Looks great. Serves a purpose until you can build a slide out pantry!

So unfortunate you have to use Ryobi tools

U think these are worth the money? Debating right now either these in a 10 inch. Or a set of 12s in a box.

best vid i have had as typically the vids i see are telling me to buy this or that. I like its just about driving techniques to use. thnx a bunch going to be doing my 1st beach driving in July.

Pre-filters are great idea in some cases but can also help kill your engine if you don't do homework. Example: everyone loves to rag on the ZD30Di in the Patrol and Navara but fail to notice these bloody filters. Every time I see a dead injector pump, I find these types of filters sitting inline. Injector pumps are not designed to pull/suck fuel from the tank let alone through multiple filters, especially if you are that special kind of muppet who puts a 2 micron in. These engines must have a lift pump installed. The VP44 for example is designed to have 1BAR (14PSI) of positive pressure at the pump inlet. CRD engines have a pump designed to boost fuel pressure to stupid levels but again, there are designs that are not designed to suck, do your homework before trusting RUclipsrs and their "ExSpurt" qualifications. This video is a great example, "I do because others have done" without actually knowing or understanding. Research your fuel system and not just from the manufacturue of the car.... Number 1 reason the VP44 in the Nissans die is from having to suck as Nissan ignored the specs for the pumps and chose not to run lift pump.

Awesome job! Tip for your drawer builds in the future, look into pocket holes or dominos. Might need a slightly thicker plywood, but will eliminate the need for a side wooden frame 👍🏼

Noice Vid. Expensive but... Are you also going to install Catch Can? does this installation void any warranty on NEW vehicles ?? What is the STANDARD DMAX Filter rating?

Other review sites people complain of internal condensation and it wetting the mattress. Have you found this a problem?

Could you test current draw before and after?

Yes certainly a great addition to avoid issues 100% agree. I on the other hand went to a secondary finer filter following in line from factory filter. One thing I would recommend to anyone doing this is: Install filter into additional filter housing, connect hoses to all but factory inlet, then prime system allowing excess fuel to run through entire system & drain into a bottle. I did this prior to connecting to factory system. I was totally gobsmacked how much crap came from rubber hoses, filter assembly & obviously the filter, being mine was secondary that shit would have gone directly into my common rail, may have been detrimental. Hence now, every replacement filter gets bled prior to connection into system.

I also have an off-road animal bull bar on my new rig I am fitting out, they look great

Terrific video, beautiful part of the country

Another terrific build & video

Really clever, well done

Best setup I have ever seen

Great stuff mate, good video, great walk through and even better results!

5.28 your standing right where our shack use to be

Well done mate. Great video and great result! Good to watch.